Request A Quote
 
 
    
Calculate Payments at www.equipmentleasingbiz.com
Bananza
Col-Met  Goff's Curtain Walls
  Accudraft  
Address:  P.O. Box 57422
                  Jacksonville, FL  32241
 
Phone:  904-514-8332
Email:   This email address is being protected from spam bots, you need Javascript enabled to view it
 
Automotive Print E-mail
 
Each of Col-Met's EZ Pit Downdraft Automotive Booths take fresh air from the cleaner upper levels of your shop using a ceiling filter bank and draw it down and away from your vehicle through pit exhaust filters. Col-Met EZ Pit Downdraft Automotive Booths are easy to install, operate and maintain.
 
 
Col-Met's EZ-26 Modified Downdraft Automotive Booths take fresh air from the cleaner upper levels of your shop using a ceiling filter bank and draw it down to an exhaust filter system at the opposite end. A pre-filter plenum allows for additional intake air filtration. Col-Met EZ-26 Modified Downdraft Automotive Booths are easily modified for pressurization by an intake fan or heated air makeup unit, and are also easy to install, operate, maintain and quick ship.
 
 
Col-Met's EZ-26 Side Downdraft Automotive Booths take fresh air from the cleaner upper levels of your shop using a ceiling filter bank and draw it down and away through floor-level exhaust filters on both sides. Col-Met EZ-26 Side Downdraft Automotive Booths are easily pressurized with an air replacement unit and cure cycle, and are also easy to install, operate and maintain.
 
 
Col-Met's EZ-26 Classic Crossdraft Automotive Booths intake air through door filters and exhaust through filter systems at the opposite end. Col-Met EZ-26 Classic Crossdraft Automotive Booths are easy to install, operate, maintain and quick ship.
 
 
Each of Col-Met's Classic Crossdraft Automotive Booths intake air through door filters and exhaust through a filter system at the opposite end. Col-Met Classic Crossdraft Automotive Booths can be equipped with an air replacement units and cure cycles.
 
Enviroflo® Side Downdraft Booth
 
With Col-Met's Enviroflo® Side Downdraft Automotive Booth, fresh air is taken from the cleaner upper levels of your shop by a ceiling filter bank and is drawn down and away by floor-level exhaust filters on both sides. A Col-Met Enviroflo® Side Downdraft Automotive Booth can be equipped with an air replacement unit and cure cycles.
 
 
A Col-Met Value Pack-25 Automotive Booth intakes air through door filters and exhausts through a filter system at the opposite end. Col-met's Value Pack-25 Automotive Booth is economically priced and space-saving.
 
 
Col-Met's Classic Auto/Truck Paint Spray Booths are available in crossdraft and downdraft models. Crossdraft intakes air through door filters and exhausts through filters at the opposite end. Downdraft intakes air from the cleaner upper levels of your shop through a ceiling filter bank and draws it down and away through floor-level exhaust filters on both sides. Both are available in solid-back and drive-through designs; crossdraft is also available with reverse flow. All Col-Met Classic Auto/Truck Paint Spray Booths can be equipped with air replacement units and cure cycles.
 
 
Each of Col-Met's EZ Paint Mixing Rooms use a ceiling air intake plenum to filter air downward through the work area and into an exhaust chamber at the lower opposite end of the room. An exhaust plenum re-filters and discharges the air into the atmosphere through a stack. Col-met EZ Paint Mixing Rooms are easy to install, operate, maintain and quick ship.
 
 
 
A Col-Met EZ Limited Finishing Prep Station takes fresh air from the cleaner upper levels of your shop using a pressurization fan, and a ceiling filter bank located near the entry forces that air downward. A filtered exhaust plenum at the opposite end draws the air through the prep station and then an exhaust fan and stack discharge it into the atmosphere. Col-Met's EZ Limited Finishing Prep Station is easily installed, operated, maintained, and equipped with heat by adding a heated air makeup unit.
 
 
Each of Col-Met's Industrial Batch Powder Booths draws in shop air through its open front and passes it through the booth's work area into an exhaust plenum where it is treated by three stages of filtration and then recirculated no air makeup needed. If you're looking for an easy-to-assemble, low-maintenance, spray-to-waste design, a Col-Met Industrial Batch Powder Booth is the booth for you.
[ Back ]